Advice line Advice line:


Current Location:Home > Products > Environmental Test Chamber > High & Low Temperature Test Chamber > TS Series Temperature and Humidity Testing Chamber

High & Low Temperature Test Chamber

  • TS Series Temperature and Humidity Testing Chamber
TS Series Temperature and Humidity Testing Chamber

TS Series Temperature and Humidity Testing Chamber

    Model:TS Series

    Classification:High & Low Temperature Test Chamber


  • Online Ordering

Product Summary

The temperature and humidity tester is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance. It is suitable for the industries of electron, electrical equipment, vehicle, metal, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.


Model TS-80-2M TS-150-2M TS-225-2M TS-408-2M TS-1000-2M
Capacity 80L 150L 225L 408L 1000L
Interior size (cm)W*H*D 40*50*40 50*60*50 50*75*60 60*85*80 100*100*100
Exterior size (cm)W*H*D 93*131*81 100*155* 110 100*170* 120 110*180* 140 150*195* 165
Temperature range -20℃~+150℃
Temperature stability ±0.5℃
Temperature uniformity ±2.0℃
Humidity range 20%~98%RH
Humidity stability ±1.5%
Humidity deviation ≤±5%RH when humidity is less than 75%RH; ≤±3%RH when the humidity is more than 75%RH
Heating up heat up from -20℃ to +150℃,≤60mins
Cooling down cool down from +20℃ to -20℃, ≤40mins
Ambient temperature ambient temperature condition for the chamber working:+5℃~+35℃
Exterior material 1)stainless steel; 2)galvanized steel sheet bake finish
Interior material SUS304 stainless steel
Insulation technology outer rigid polyurethane foaminter glass fibre cotton
Refrigeration mode mechanical vapour compression refrigeration-single stage; cooling mode: air-cooling
Refrigeration compressor totally enclosed plunger compressor imported from France (low noise/environment protection)
Refrigerant environment protection R404A(DuPont)
Circulating fan high temperature induction motorcentrifugal wind wheel
Heater high reliability stainless steel packaging finned heater/selectable: nickel chrome alloy bare wire heater
Humidifier built-in stainless steel anticorrosion heating pipe, deflector type humidification(convenient to clean, low water consuption)/available to select outer humidification barrel
Control mode curing input PLC control system
Displayer 7 inches TFT Truecolor LCD screen,resolution: 800*480; manual touch screen input
Operation mode fixed value and program
Program capacity 120 porgrams and each program can set 100 sections
File saving with USB interface,convenient to input or output the programs and the internal parameters; available to output the curves and datas by U disk
Communication to select LAN network interface, convenient to remote connection control and fault diagnosis
Water supply pump drive
Water tank 15L/20L food level PE water tank, available to clean dismantling.
water requirements resistivity of humidifying water supply ?≥500MΩ
Standard accessaries a 50mm diameter test hole and a soft plug;2 stainless steel shelves with excellent ventilation; a observing window,4 mobile caster wheels and 4 wheel pads
Power 3 phase, 4 wires, 380V 50Hz±10%+protective earth wire
Single maximum currently(A) 7A 9A 12A 13A 21A
Rated power(KW) 2.5KW 4.5KW 6KW 8KW 12KW
Weight(KG) 250 290 300 380 680
Protection device power anti-phase overvaltage protection; power leakage protection switch; test specification overtemperature protection(independent); compressor overload high and low pressure protection; heater overtemperature protection;humidifier dry heating protection;water shortage protection; controller self diagnosis fault reminding

Official AccountsClose